A garment sample should be approved against written requirements, not memory or photographs alone. Before authorising bulk production, record the result of these eight checks and update the approved specification.

Garment sample approval with measurements, trims and inspection markers
Measure the physical sample and compare materials, trims and workmanship with the approved development requirements.

1. Confirm the correct sample version

Check the style number, colour, size and revision date. The sample should match the latest clothing tech pack and comment sheet.

2. Measure every agreed point

Use the approved point-of-measure method and record actual results. Do not approve only the chest and length if sleeve, shoulder, pocket or opening dimensions affect fit.

3. Compare fabric and colour

Confirm composition, construction, weight, handfeel, finish and colour against an approved swatch. Review panels under consistent lighting and note any acceptable shade variation.

4. Inspect construction

Check seam type, stitch density, reinforcement, seam allowance, symmetry and pressing. Open and close zippers, buttons, snaps and drawcords to confirm operation and placement.

5. Review decoration and branding

Measure print, embroidery, patch and label placement. Compare artwork scale, colour, edge quality and attachment method with the approved files.

6. Check comfort and movement

Conduct a fitting on the intended sample size. Review balance, mobility, closures, lining and any areas that twist, pull or restrict movement.

7. Complete required tests

Where relevant, confirm shrinkage testing, colour performance, seam strength or pilling tests using an agreed method and production-relevant material.

8. Issue a controlled approval

Photograph key details, sign and date the approved sample, and list every remaining condition. Keep a sealed reference for production and ensure the later garment AQL inspection uses the same specifications.

Sample approval reduces ambiguity, but it does not replace bulk quality control. To discuss a new apparel development, send your product requirements for review.